Please note: this questionnaire has not yet been checked by a professional. Treat the outcome as an example only.
Replacing windows and outside doors
- Difficulty:
- Demanding
- Duration:
- One day per opening, after a few weeks of delivery time
- Questions:
- 19
- 3D configurator:
- you see your job in 3D with every question
- Step-by-step plan:
- 16 steps

Replacing a window is more than putting a frame in a hole. The new window has to be level and square, properly anchored, and the joint all round has to be rain-tight outside and airtight inside. Otherwise you get draughts, condensation and a window that does not close.
We ask about your opening, your wall and your old frame, and work everything out: the window or door, joint tapes, foam, anchors, sealant, the finishing inside and all the tools. Then you get a step-by-step plan from measuring to maintenance. With a sliding door, an opening that is too large, work on a ladder, a new wall opening or possible asbestos, we tell you honestly who should do it.
Often combined with
Jobs that usually come just before or after this one.
3D configuratorPainting interior woodworkLacquering interior doors, door frames, skirting and windows on the inside: degreasing, sanding, filling, primer and two coats of lacquer.Moderate18 questions2 to 4 days, because of the drying time between coatsView this job
3D configuratorInsulating an outside wall on the insideInsulating an outside wall on the inside with a stud lining of profiles, wool and a vapour barrier, or with glued insulation boards. With the damp checks that decide whether it may be done.Moderate19 questions2 to 4 days for one wall, not counting the jointingView this job
3D configuratorInstalling ventilationA fan in the bathroom or toilet, or a complete system C with extraction unit, ducts, valves and vents. For a system D you prepare everything.Moderate20 questions1 day for a fan, 3 to 5 days for a system CView this job
3D configuratorFitting a roof windowA roof window in a pitched roof with tiles or slates: between the rafters or with one trimmed rafter, with flashing, collars and the lining inside.Demanding14 questions1 to 2 days per window, including one dry day with the roof openView this job
3D configuratorFitting an interior doorA new door set in an existing opening, a new leaf in the old frame, or trimming a door after a new floor.Moderate17 questionsHalf a day to a day per doorView this job