Electrics and ventilation
In Belgium you may install the electrics in your own home yourself. The installation does have to meet the AREI rules and is inspected by an accredited inspection body before it goes into use. If you follow the rules and work neatly, you can pass that inspection.
We help you with the plan, the circuits, the right cable size and breaker, and with what the inspector wants to see. Always work with the power off and check that with a tester. If in doubt, have the work checked by an electrician before you book the inspection. You will also find ventilation here: a well-insulated home needs a system that removes moisture.

Jobs in this category6 jobs
For every job we ask about your situation and you get a step-by-step plan and two shopping lists made for you.
3D configuratorFitting or renewing a consumer unitA new single-phase consumer unit with a main residual current device, 30 mA devices and breakers, following the AREI and ready for inspection.Demanding19 questions1 day of preparation, half a day to a full day for the changeover, plus the inspectionView this job
3D configuratorPulling electrical circuitsNew circuits from the consumer unit to every socket, light point and appliance: chases, flush boxes, conduit and wire, and the diagrams for the inspection.Demanding15 questions2 to 5 days, depending on the number of pointsView this job
Connecting sockets, switches and light pointsSafely connecting sockets, switches, two-way circuits, lamps and an outdoor lamp with a motion sensor to cables that are already in place.Moderate18 questionsHalf a day to a full dayView this job
3D configuratorPreparing for the electrical inspection (AREI)Get your electrical installation ready for the inspection: diagrams, labels, a self-check, booking and what to do with the report.Easy17 questionsHalf a day to a day of preparation, plus the visitView this job
3D configuratorInstalling ventilationA fan in the bathroom or toilet, or a complete system C with extraction unit, ducts, valves and vents. For a system D you prepare everything.Moderate20 questions1 day for a fan, 3 to 5 days for a system CView this job
3D configuratorInstalling LED lightingLED strips in an aluminium profile, recessed spots in the ceiling and a dimmer that matches them.Moderate22 questionsHalf a day to a full dayView this jobProjects with jobs from this category
Taking on more than one job? A project puts everything in the right order.

Renovating a complete bathroom
From demolition to inspection: all the jobs of a bathroom renovation in the order you carry them out.10 steps, 21 jobsView the project
Converting the attic into a room
From bare attic to bedroom or office: roof window, insulation, electrics, walls and finishes in the right order.9 steps, 12 jobsView the project