Please note: this questionnaire has not yet been checked by a professional. Treat the outcome as an example only.
Laying drain pipes
- Difficulty:
- Moderate
- Duration:
- 1 to 3 days
- Questions:
- 14
- 3D configurator:
- you see your job in 3D with every question
- Step-by-step plan:
- 20 steps

A drain only works when three things are right: the diameter of each pipe, a fall of 1.5 to 2 cm per metre and proper venting. We ask which appliances you connect, how long the pipe will be and what you connect to, and work out pipes, bends, branches, clips and tools.
Then you get a step-by-step plan from setting out the fall to the test with water. If the stack is cast iron, PE or fibre cement, a plumber makes the last joint. With asbestos, too little height or a pipe to the outside, we tell you what has to happen first.
Often combined with
Jobs that usually come just before or after this one.
3D configuratorLaying water supply pipesNew hot and cold water pipes in multilayer pipe, from a manifold to every tap point, with pressure test and flushing.Demanding18 questions2 to 4 days, plus drying timeView this job
3D configuratorFitting a walk-in showerA shower level with the floor: sloped board or flat tray, the drain, a watertight shower zone and the glass screen.Demanding19 questions3 to 5 working days, spread over 2 weeks because of the drying timesView this job
3D configuratorFitting a wall-hung toiletA wall-hung toilet on a frame with concealed cistern: fixing, connecting to the existing drain and water pipe, cladding with plasterboard, bowl and flush plate.Moderate21 questions1 to 2 days of work, plus the time for finishing the wallView this job
3D configuratorFitting a washbasin or vanity unitA wall-hung or floor-standing vanity unit or a basin on its own, with tap, trap and mirror, on existing supply points.Moderate17 questionsHalf a day, plus 24 hours of drying timeView this job
3D configuratorFitting a bathA built-in bath on adjustable feet or a freestanding bath, connected to the existing drain and tap connections, with a surround and a joint that stays tight.Moderate18 questions1 to 2 days, plus 24 hours for the sealant joint to cureView this job