Please note: this questionnaire has not yet been checked by a professional. Treat the outcome as an example only.
Fitting a washbasin or vanity unit
- Difficulty:
- Moderate
- Duration:
- Half a day, plus 24 hours of drying time
- Questions:
- 17
- 3D configurator:
- you see your job in 3D with every question
- Step-by-step plan:
- 20 steps

Fitting a washbasin or vanity unit takes half a day, as long as the wall can carry the weight and the supply points are in the right place. The wall matters most: a wall-hung unit with a full basin that someone leans on pulls hard on its fixings.
We ask about your wall, your water supply and your drain and put your list together: fixings that suit your wall, tap, waste, trap, the sleeve to your drain, silicone and what you need for the mirror. Then you get a step-by-step plan in the order a professional works, from shutting off the water to the leak test and the silicone joint. If there are no supply points, the wall is not strong enough or there is a chance of asbestos, we tell you what has to happen first.
Often combined with
Jobs that usually come just before or after this one.
3D configuratorTiling a bathroom wallWall tiles on plasterboard, plaster or existing tiles, with the right primer and waterproofing in the wet zone.Moderate15 questions2 to 4 days, plus drying timeView this job
3D configuratorLaying water supply pipesNew hot and cold water pipes in multilayer pipe, from a manifold to every tap point, with pressure test and flushing.Demanding18 questions2 to 4 days, plus drying timeView this job
3D configuratorLaying drain pipesNew PVC or PP drain pipes from your appliances to the stack, with the right diameters, the right fall and a test with water.Moderate14 questions1 to 3 daysView this job
Connecting sockets, switches and light pointsSafely connecting sockets, switches, two-way circuits, lamps and an outdoor lamp with a motion sensor to cables that are already in place.Moderate18 questionsHalf a day to a full dayView this job
3D configuratorFitting a bathA built-in bath on adjustable feet or a freestanding bath, connected to the existing drain and tap connections, with a surround and a joint that stays tight.Moderate18 questions1 to 2 days, plus 24 hours for the sealant joint to cureView this job